• Which product is best for me?

Which ring guard will work best for you depends on how much size reduction you need as well as what you personally find comfortable.

• RingSlinky
• RING NOODLE and EZsizer
• RingShrinker
• DipSize

RingSlinky

•  How do I measure my ring for RingSlinkys?

• What if my ring band measurement is between two sizes or I'm still not sure which size to order?

• How much size reduction do RingSlinkys provide?

How much size reduction a RingSlinky provides depends on which size RingSlinky you use and how snuggle it fits your ring. A 1.5mm or 2.0mm RingSlinky will give you about 1-1/2 sizes in reduction, where as that number is closer to 3-1/2 sizes with a 5.0mm or 6.0mm RingSlinky.

• What if the RingSlinky makes my ring too tight?

Shortening the length of the RingSlinky will decrease the amount of size reduction it provides. RingSlinkys can be trimmed using a pair of sharp scissors or a knife on a safe cutting surface.

• How do I put the RingSlinky on my ring?

To install your RingSlinky, slip one end over the ring and twist it on. If the RingSlinky is tight on the ring, it can be a little tricky to get it started. But once you have the first few coils wrapped around the ring, you should be able to easily twist the RingSlinky on by rolling it between your thumb and index fingers.

• Should the RingSlinky easily slide around on the ring?

No, the RingSlinky should fit snugly around the ring. 

• Why is my ring still turning on my finger?

If the RingSlinky is too big for your ring, it will not prevent the ring from rotating. If you encounter this problem, we recommend trying a smaller size RingSlinky.

• How do I prevent soap and lotion from building up in or under the RingSlinky?

Even without a ring guard, buildup can occur in and around settings and gemstones. The best practice is always to remove your rings before washing your hands or applying lotion, and this is especially true when using any kind of ring guard. If needed, you can remove the RingSlinky and wash it with dish soap. Allow it to dry before reapplying it to your ring.

• Will the RingSlinky wear out?

The Ring Slinky will stretch slightly over time and may eventually become too loose to stay snugly in place on the ring. For this reason, we offer packages of individual sizes in quantities of 3, 6, 9, and 12; so you can have extra on hand should you want to swap it out.

RING NOODLE and EZsizer

•  How do I measure my ring for RING NOODLEs and EZsizers?

• What if my ring band measurement is between two sizes or I'm still not sure which size to order?

We offer three different RING NOODLE mixed pack options. One contains Mini, Petite, and Narrow RING NOODLEs. The second contains Narrow, Medium, and Wide RING NOODLEs. The third contains all six sizes of RING NOODLEs: Mini, Petite, Narrow, Medium, Wide, and Extra Wide. Ordering a mixed pack will allow you to try different sizes to see which provides the best fit for your ring.

• How much size reduction do RING NOODLEs provide?

The Mini and Petite size RING NOODLEs will provide about 1 to 1-1/2 sizes in reduction. The Narrow, Medium, Wide, and Extra Wide size RING NOODLEs will provide about 1-1/2 to 2-1/2 sizes in reduction.

• What if the RING NOODLE makes my ring too tight?

Shortening the length of the RING NOODLE will decrease the amount of size reduction it provides. RING NOODLEs can be trimmed using a pair of sharp scissors or a knife on a safe cutting surface.

• How do I put the RING NOODLE on my ring?

To install your RING NOODLE, start with the split side of the RING NOODLE facing the outside of the back of your ring. Begin to slip the ring into one end of the split and then rotate it to the inside of the ring as you push it on the rest of the way. The seam should be on the outside of the ring when your are finished.

• Should the RING NOODLE slide easily around on the ring?

No, the RING NOODLE should fit snugly around the ring. 

• Why is my ring still turning on my finger?

If the RING NOODLE is too big for your ring, it will not prevent the ring from rotating. If you encounter this problem, we recommend trying a smaller size RING NOODLE.

• Why is the RING NOODLE falling off of my ring?

The only way a RING NOODLE can fall off of your ring is if the ring is significantly too large for your finger AND the RING NOODLE is too big for the ring. If this happens, please measure your ring to make sure you have ordered the correct size.

• How do I prevent soap and lotion from building up inside the RING NOODLE?

Even without a ring guard, buildup can occur in and around settings and gemstones. The best practice is always to remove your rings before washing your hands or applying lotion, and this is especially true when using any kind of ring guard. If needed, you can remove the RING NOODLE and wash it with dish soap. Allow it to dry before reapplying it to your ring.

• Will the RING NOODLE wear out?

The RING NOODLE may stretch slightly over time and may eventually become too loose to stay snugly in place on the ring. For this reason, we offer packages of individual sizes in quantities of 3, 6, 9, and 12; so you can have extra on hand should you want to swap it out.

 RingShrinker

• How much size reduction does RingShrinker provide?

RingShrinker allows for flexibility in how much it will reduce the size of your ring. You may choose to apply RingShrinker as sizing dots or uniformly across the inside of the ring. For more size reduction, apply a second coat.

• How long will RingShrinker stay on my ring?

How long RingShrinker will last on your ring depends on a number of factors. For the best results, clean the ring using the included wipes, follow the instructions carefully, and be sure to allow it to cure fully before wearing the ring. Ring Shrinker works best on rings with wider bands because there is more surface area to adhere to. It will also last longer if you remove your ring before washing your hands and showering.

• How should I store RingShrinker?

The RingShrinker resin cures under UV light. In addition to the sun (the most powerful source of UV light), florescent light also contains UV rays. So, it is very important to keep the resin in the foil bag it is packaged in to prevent it from curing in the bottle.

•  How do I remover RingShrinker from my ring?

Follow the instructions on the package for using the included solvent to remove the RingShrinker resin from your ring.

DipSize

• How much size reduction does DipSize provide?

DipSize allows for flexibility in how much it will reduce the size of your ring. For more size reduction, apply more coats.

• How long will DipSize stay on my ring?

How long DipSize will last on your ring depends on a number of factors. For the best results, clean the ring using the included wipes, follow the instructions carefully, and be sure to allow the DipSize to cure fully before wearing the ring. Applying multiple coats will make it more durable. It will also last longer if you remove your ring before washing your hands and showering.

 Exchanges/Returns

If the product that you purchased did not fit your ring well or did not provide the ring size reduction that you needed, we will be glad to exchange you order for another size or style.

If you wish to return an item, please return it to us and we will issue a refund upon receiving the returned item. The return address is on the mailer that your order came in. You are welcome to re-use the mailer for your return.